Hyundai Santa Fe (TM): Emergency commodity
Your vehicle is equipped with emergency commodities to help you respond to emergency situation.
Fire extinguisher
If there is small fire and you know how to use the fire extinguisher, follow these steps carefully.
1. Pull out the safety pin at the top of the extinguisher that keeps the handle from being accidentally pressed.
2. Aim the nozzle towards the base of the fire.
3. Stand approximately 2.5 m (8 ft) away from the fire and squeeze the handle to discharge the extinguisher. If you release the handle, the discharge will stop.
4. Sweep the nozzle back and forth at the base of the fire. After the fire appears to be out, watch carefully since it may re-ignite.
First aid kit
Supplies for use in giving first aid such as scissors, bandage and adhesive tape, etc. are provided.
Triangle reflector
Place the triangle reflector on the road to warn oncoming vehicles during emergencies, such as when the vehicle is parked by the roadside due to problems.
Tire pressure gauge (if equipped)
Tires normally lose some air in day-today use, and you may have to add a air periodically and usually it is not a sign of a leaking tire, but of normal wear. Always check tire pressure when the tires are cold because tire pressure increases with temperature.
To check the tire pressure, take the following steps:
1. Unscrew the inflation valve cap that is located on the rim of the tire.
2. Press and hold the gauge against the tire valve. Some air will leak as you begin and more will leak if you don’t press the gauge in firmly.
3. A firm non-leaking push will activate the gauge.
4. Read the tire pressure on the gauge to see whether the tire pressure is low or high.
5. Adjust the tire pressure to the specified pressure. Refer to “Tires and Wheels” section in chapter 2.
6. Reinstall the inflation valve cap.
Towing
Towing service [A] : Dollies If emergency towing is necessary, we recommend having it done by an authorized HYUNDAI dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary ...
Maintenance
...
See also:
Forward and backward
1. Push the control switch forward or backward to move the seat to the desired position. 2. Release the switch once the seat reaches the desired position. ...
Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram ...
Front Door Module. Repair procedures
Replacement 1. Remove the front door window glass. 2. Remove the front door outside handle. 3. Disconnect the front door main connector (A). 4. Loosen the front door outside handle base mounting bolt (A). ...