Hyundai Santa Fe (DM): Height Adjust. Repair procedures - Front Seat Belt - Body (Interior and Exterior)Hyundai Santa Fe (DM): Height Adjust. Repair procedures

Replacement

1.
Remove the front seat belt upper anchor.
2.
After loosening the mounting bolts, then remove the height adjust (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
•
Replace any damaged clips.

Height Adjust. Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle. Components and Components Location
Component Location 1. Front seat belt buckle ...

See also:

Rear parking assist system precautions
The rear parking assist system may not sound sequentially depending on the speed and shapes of the objects detected. The rear parking assist system may malfunction if the vehicle bumper height or sensor ...

Troubleshooting
Troubleshooting Symptom Possible cause Remedy One lamp does not light (all exterior) Bulb burned out Replace bulb Socket, wiring or ground faulty Repair if necessary Head lamps do not light Bulb burned ...

Tilting the sunroof
When the sunshade is closed If you push the sunroof control lever upward, the sunshade will slide halfway open then the sunroof glass will tilt. To stop the sunroof movement at any point, pull or push ...