Hyundai Santa Fe (DM): Rail Pressure Sensor (RPS). Specifications
Specification
Rail Pressure Sensor (RPS). Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...
Rail Pressure Sensor (RPS). Troubleshooting
Signal Waveform ...
See also:
Drive Belt. Repair procedures
Removal and Installation 1. For release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A). 2. Install the drive belt (A). Rotate the drive belt tensioner arm (A) ...
Start/Stop Button. Repair
procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the driver crash pad lower panel. 3. Disconnect the start/stop button connector (B) after removing the center fascia garnish (A). 4. Remove ...
Checking the engine oil level
Type A Type B 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for ...
