Hyundai Santa Fe (DM): Specifications
Specifications
Smart Key Unit
|
Items |
Specification |
|
Rated voltage |
DC 12V |
|
Operating voltage |
DC 9 ~ 16V |
|
Operating temperature |
-22°F ~ 167°F (-30°C ~ 75°C) |
|
Load |
Max. 2.9mA (When welcome light function off) |
RF Receiver
|
Items |
Specification |
|
Frequency |
315 Mhz |
|
Antenna type |
FSK (Frequency Shift Keying) |
Smart Key Fob
|
Items |
Specification |
|||
|
Battery |
Lithium battery 3V 1EA |
|||
|
Distance |
30m from vehicle, RF : 30m, Passive(LF) : 0.7m |
|||
|
Battery life |
More than 2 years (10 times / a day)
|
|||
|
Push buttons |
4 (Door lock / unlock, Tailgate, Panic) |
|||
|
Frequency(Rx) |
125 kHz |
|||
|
Frequency(Tx) |
315 MHz |
|||
|
Numbers |
2EA |
Antenna
|
Items |
Specification |
|
Rated voltage |
DC 12V |
|
Operating voltage |
DC 9 ~ 16V |
|
Operating temperature |
-22°F ~ 167°F (-30°C ~ 75°C) |
|
Frequency |
125kHz |
|
Numbers |
Interior(3EA), Door(2EA), Bumper(1EA) |
Smart Key System
...
Components and Components Location
Component Location (1) 1. Smart key unit 2. Buzzer 3. RF receiver 4. Door outside handle 5. Interior antenna 2 6. Interior antenna 1 Component Location (2) 1. Tailgate open switch 2. Bumper antenna 3. ...
See also:
DBC Switch. Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the crash pad side switch assembly (A) after loosening the screws. 4. ...
Multifunction Switch
Components and components location Component 1. Steering column 2. Multifunction switch 3. Screw 4. Clock spring Specifications Specifications Items Specifications Rated voltage DC 12V Operating temperature ...
Height Adjust. Repair procedures
Replacement 1. Remove the front seat belt upper anchor. 2. After loosening the mounting bolts, then remove the height adjust (A). Tightening torque : 39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft) ...
