Hyundai Santa Fe (DM): SRSCM
- SRS Control Module (SRSCM). Description and Operation
- SRS Control Module (SRSCM). Components and Components Location
- SRS Control Module (SRSCM). Repair procedures
- Front Impact Sensor (FIS). Description and Operation
- Front Impact Sensor (FIS). Components and Components Location
- Front Impact Sensor (FIS). Repair procedures
- Side Impact Sensor (SIS). Description and Operation
- Side Impact Sensor (SIS). Components and Components Location
- Side Impact Sensor (SIS). Repair procedures
- Seat Belt Buckle Switch (BS). Description and Operation
- Seat Belt Buckle Switch (BS). Components and Components Location
- Seat Belt Buckle Switch (BS). Repair procedures
- Passive Occupant Detection System (PODS-F). Description and Operation
- Passive Occupant Detection System (PODS-F). Components and Components Location
- Passive Occupant Detection System (PODS-F). Repair procedures
- Schematic Diagrams
Components and Components Location
Components 1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Passenger Airbag (PAB) 5. Side Airbag (SAB) 6. Curtain Airbag (CAB) 7. Knee Airbag (KAB) 8. Seat Belt Pretensioner (BPT) 9. Front ...SRS Control Module (SRSCM). Description and Operation
Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...See also:
Engine And Transaxle Assembly
Engine Cover. Repair procedures Removal and Installation 1. Remove the engine cover (A). • Remove the engine cover on room temperature. • Do not disengage both front and rear mounting ...
Rear Door Side Weatherstrip. Repair procedures
Replacement 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m,14.5 ~ 21.7 lb-ft) 2. Detach the clips, then remove the rear door side weatherstrip (A). ...
Reservoir Tank. Repair procedures
Removal and Installation 1. Remove the over flow hose(A). 2. Remove the reservoir tank(B). Tightening torque: 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft) 3. Install in the reverse order of removal. ...