Hyundai Santa Fe (DM): Flex steer - Steering wheel - Features of your vehicleHyundai Santa Fe (DM): Flex steer

The FLEX STEER controls steering effort as driver's preference or road condition.

The FLEX STEER controls steering effort as driver's preference or road condition.

You can select the desired steering mode by pressing the FLEX STEER button.

Type A

Type A

Type B

Type B

When the steering mode button is pressed, the selected steering mode will appear on the LCD display.

If the steering mode button is pressed within 4 seconds, the steering mode will change as above pictures.

If the steering wheel mode button is not pressed for about 4 seconds, the LCD display will change to the previous screen.

Normal mode

Type A

Type A

Type B

Type B

The normal mode offers medium steering effort.

Comfort mode

Type A

Type A

Type B

Type B

The steering wheel becomes lighter.

The comfort mode is usually used when driving in downtown or parking the vehicle.

Also, the comfort mode helps weak people to drive easily.

Sport mode

Type A

Type A

Type B

Type B

The steering wheel becomes heavier. The sport mode is usually used when driving in highway.

CAUTION

  • For your safety, if you press the steering mode button while operating the steering wheel, the LCD display will change, but the steering effort will not change immediately. After operating the steering wheel, the steering effort will change automatically to the selected mode.
  • Be careful when changing the steering mode while driving.
  • When the electronic power steering is not working properly, the flex steering wheel will not work.
Horn
To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed. Check the horn regularly to be sure it operates ...

Mirrors
Inside rearview mirror Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. WARNING - Rear visibility Do not place objects ...

See also:

Power Seat Control Switch. Repair procedures
Inspection Power Seat Control Switch 1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...

Rear Driveshaft. Components and Components Location
Components 1. Tone wheel 2. BJ joint 3. BJ boot 4. BJ boot big part band 5. BJ boot small part band 6. Shaft 7. TJ boot small part band 8. TJ boot big part band 9. TJ boot 10. Snap ring 11. Circlip 12. ...

Drive Belt. Repair procedures
Removal and Installation 1. For release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A). 2. Install the drive belt (A). Rotate the drive belt tensioner arm (A) ...