Hyundai Santa Fe (DM): Rear Seat Belt Buckle. Repair procedures - Rear Seat Belt - Body (Interior and Exterior)Hyundai Santa Fe (DM): Rear Seat Belt Buckle. Repair procedures

Replacement

[Second row seat belt buckle]
•
Before removing the second row seat assembly [LH/RH], first remove the second row center seat belt buckle (A) and seat assembly [RH](B).
1.
Place the second row seat assembly [LH] to the rear and second row seat assembly [RH] to the front.
2.
Seperate the second row seat belt buckle and second row seat assembly [LH] by removing the mounting bolt (C).
(LH)
1.
Remove the second row seat assembly [LH].
2.
After loosening the mounting bolt (A), then remove the second row seat belt buckle [LH] (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
(Center)
1.
Remove the second row seat assembly [RH].
2.
After loosening the mounting nuts, then remove the second row center seat belt buckle rail (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
(RH)
1.
Remove the second row seat assembly [RH].
2.
After loosening the mounting screw, then remove the rear seat shield inner cover (A).
3.
After loosening the mounting bolt (A), then remove the second row seat belt buckle [RH] (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
[Third row seat belt buckle]
(LH)
1.
Remove the third row seat assembly [LH].
2.
After loosening the mounting bolt, then remove the third row seat belt buckle [LH] (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
(RH)
1.
Remove the third row seat assembly [RH].
2.
After loosening the mounting bolt, then remove the third row seat belt buckle [RH] (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.

Rear Seat Belt Buckle. Components and Components Location
Component Location [Second row seat belt buckle] 1. Second row seat belt buckle [LH] 2. Second row center seat belt buckle 3. Second row seat belt buckle [RH] [Third row seat belt buckle] 1. Third row ...

Body Electrical System
...

See also:

Fuel Tank Pressure Sensor (FTPS). Schematic Diagrams
Circuit Diagram ...

Multimedia Jack. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the console front complete assembly (A). 3. Remove the multimedia jack (B) after disconnecting the connector (A) from the console front ...

Temperature control
The temperature control switch allows you to control the temperature of the airflow in the vehicle. To change the temperature: Press the (red) switch to increase temperature. Press the (blue) switch to ...