Hyundai Santa Fe: In case of an emergency while driving
Components and Components Location Shift Lever. Repair procedures Water Temperature Control Assembly. Repair procedures
Hazard warning flasher Type A Type B The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used ...
Road warning
If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. ...
If the engine stalls at a crossroad or crossingSee also:
Components Location 1. PCV Valve 2. Canister 3. Purge Control Solenoid Valve (PCSV) 4. Fuel Tank Pressure Sensor (FTPS) 5. Canister Close Valve (CCV) 6. Fuel Level Sender (FLS) 7. Fuel Tank Air Filter ...
Removal 1. Remove the floor console. 2. Remove the air duct. 3. Disconnect sports mode connector (A). 4. Disconnect the shift cable (A). 5. Remove the shift lever assembly (A) by removing the bolts (C-4ea). ...
Removal 1. Disconnect the battery negative terminal. 2. Loosen the drain plug and drain the engine coolant. 3. Remove the radiator upper hose and lower hose. 4. Disconnect the connectors and then remove ...
