Hyundai Santa Fe: What to do in an emergency
Rheostat. Repair procedures Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Repair procedures Purge Control Solenoid Valve (PCSV). Repair procedures
This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your ...
Vehicle weight
Hazard warning flasher Type A Type B The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used ...
Road warningSee also:
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad side cover. 3. Remove the lower crash pad switch assembly (A) after loosening the screws (3EA). 4. Remove the rheostat ...
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: ...
