Hyundai Santa Fe (TM): Special service tools
| Special Service Tools |
|
Tool Name / Number |
Illustration |
Description |
|
LKA Compensator (09890-3V100) |
|
Used for compensating front view camera unit |
|
Vertical measuring instrument (09964-C1200) |
|
Used to measure left/right tilts when automatic tolerance compensation for
front camera is performed. Use together with the (09890-3V100). However, do not use it if vertical measuring instrument (09958-3T060) is available. |
|
BCW Sensor Correction Tool Set (09958-3T500) |
|
Used to correct the blind-spot radar unit. |
|
Case, Manual, String (09958-3T120) |
|
Used to correct the blind-spot radar unit. Used to create a center line. |
|
Vertical Plumb (09958-3T010) |
|
Used to correct the blind-spot radar unit. Used to create a center line. |
|
Spirit Level (09958-3T070) |
|
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
BCW Unit Fixing Adaptor (09958-3T080) |
|
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
Digital Protractor (09958-3T090) |
|
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
Digital Inclinometer (09958-3T100) |
|
Used to correct the blind-spot radar unit. Used to measure the vertical angle. |
|
SCC Setting Reflector (09964-C1100) |
|
Used for front radar unit setting |
|
Calibration Reflector (0K964-J5100) |
|
Used for front radar unit setting |
|
SCC Setting Tripod (09964-C1300) |
|
Used for front radar unit setting |
Description and operation
Description System Description Advanced Driver Assistance System (ADAS) analyzes the exterior environment of a vehicle and driver status to provide visibility / display / guide / warning for driving and ...
Front View Camera System
Description and operation Description and Operation Blcok Diagram • This system monitors the driving situations through the radar and the camera. Thus, for a situation out of the sensing ...
See also:
ESP(Electronic Stability Program) System
Components and components location Components 1. ABS control module (HECU) 2. Front wheel speed sensor 3. Rear wheel speed sensor 4. ABS warning lamp 5. Parking brake/ EBD Description and operation Description ...
Input Speed Sensor. Repair procedures
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal 1. Remove the valve body assembly. 2. Disconnect ...
Interior care
Interior general precautions Prevent caustic solutions such as perfume and cosmetic oil, from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior ...
