Hyundai Santa Fe (TM): Specifications - Engine Control/Fuel SystemHyundai Santa Fe (TM): Specifications

Specifications
Fuel Delivery System
Items
Specification
Fuel Tank
 Capacity
 67 lit. (17.7 U.S.gal., 70.8 U.S.qt., 58.9 Imp.qt.)
Fuel Filter
 Type
 Paper type
Fuel Pressure Regulator
 Regulated Fuel Pressure
 330 - 370 kPa (3.4 - 3.8 kg/cm², 47.9 - 53.7 psi)
Fuel Pump
 Type
 Electrical, in-tank type
Driven by
 Electric motor

Sensors
Manifold Absolute Pressure Sensor (MAPS)
▷ Type : Piezo-resistive pressure sensor type
▷ Specification
Pressure (kPa)
Output Voltage (V)
20.0
 0.79
46.7
 1.84
101.3
 4.0

Intake Air Temperature Sensor (IATS)
▷ Type : Thermistor type
▷ Specification
Temperature [°C (°F)]
Resistance (kΩ)
-40 (-40)
 40.93 - 48.35
-20 (-4)
 13.89 - 16.03
0 (32)
 5.38 - 6.09
10 (50)
 3.48 - 3.90
20 (68)
 2.31 - 2.57
40 (104)
 1.08 - 1.21
60 (140)
 0.54 - 0.62
80 (176)
 0.29 - 0.34

Engine Coolant Temperature Sensor (ECTS)
▷ Type : Thermistor type
▷ Specification
Temperature [°C (°F)]
Resistance (kΩ)
-40 (-40)
 41.74 - 54.54
-30 (-22)
 23.54 - 29.94
-20 (-4)
 14.13 - 16.83
-10 (14)
 8.39 - 10.22
0 (32)
 5.28 - 6.29
10 (50)
 3.42 - 4.00
20 (68)
 2.31 - 2.59
30 (86)
 1.55 - 1.76
40 (104)
 1.08 - 1.21
50 (122)
 0.77 - 0.85
60 (140)
 0.56 - 0.61
70 (158)
 0.41 - 0.44
80 (176)
 0.31 - 0.33
90 (194)
 0.23 - 0.25
100 (212)
 0.18 - 0.19

Throttle Position Sensor (TPS) [integrated into ETC Module]
▷ Type : Variable resistor type
▷ Specification
Throttle Angle (°)
Output Voltage (V)
TPS1
TPS2
0
 0
 5.0
10
 0.48
 4.52
20
 0.95
 4.05
30
 1.43
 3.57
40
 1.90
 3.10
50
 2.38
 2.62
60
 2.86
 2.14
70
 3.33
 1.67
80
 3.81
 1.19
90
 4.29
 0.71
100
 4.76
 0.24
105
 5.0
 0
C.T (6 - 15°)
 0.29 - 0.71
 4.29 - 4.71
W.O.T (93 - 102°)
 4.43 - 4.86
 0.14 - 0.57

Item
Resistance (kΩ)
TPS1
 0.875 - 1.625 [20°C (68°F)]
TPS2
0.875 - 1.625 [20°C (68°F)]

Crankshaft Position Sensor (CKPS)
▷ Type : Hall effect type
Camshaft Position Sensor (CMPS)
▷ Type : Hall effect type
Knock Sensor (KS)
▷ Type : Piezo-electricity type
▷ Specification
Item
Specification
Capacitance (pF)
 850 - 1,150

Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1]
▷ Type : Zirconia (ZrO2) [Binary] Type
▷ Specification
A/F Ratio (λ)
Output Voltage (V)
RICH
 Approx. 0.9
LEAN
 Approx. 0.04

Item
Specification
Heater Resistance (Ω)
 3.3 - 4.1 [21°C (69.8°F)]

Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2]
▷ Type : Zirconia (ZrO2) [Binary] Type
▷ Specification
A/F Ratio (λ)
Output Voltage (V)
RICH
 Approx. 0.9
LEAN
 Approx. 0.04

Item
Specification
Heater Resistance (Ω)
 3.3 - 4.1 [21°C (69.8°F)]

Accelerator Position Sensor (APS)
▷ Type : Variable resistor type
▷ Specification
Accelerator Position
Output Voltage (V) [Vref = 5V]
APS1
APS2
C.T
 0.7 - 0.8
 0.33 - 0.43
W.O.T
 3.85 - 4.35
 1.93 - 2.18

Actuators
Injector
▷ Specification
Item
Specification
Coil Resistance (Ω)
 13.8 - 15.2 [20°C (68°F)]

ETC Motor [Integrated into ETC Module]
▷ Specification
Item
Specification
Coil Resistance (Ω)
 1.2 - 1.8 [20°C (68°F)]

Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
 20.0 - 22.0 [20°C (68°F)]

CVVT Oil Control Valve (OCV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
 6.9 - 7.9 [20°C (68°F)]

Variable Intake Solenoid (VIS) Valve
▷ Specification
Item
Specification
Coil Resistance (Ω)
 30.0 - 35.0 [20°C (68°F)]

Ignition Coil
▷ Type : Stick type
▷ Specification
Item
Specification
1st Coil Resistance (Ω)
 0.62 ± 10% [20°C (68°F)]
2nd Coil Resistance (kΩ)
 7.0 ± 15% [20°C (68°F)]

Service Standard
Item
Specification
Ignition Timing (°)
 BTDC 5 ± 10
Idle Speed (rpm)
 A/C OFF
 Neutral, N, P-range
 680 ± 100
D-range
 620 ± 100
A/C ON
 Neutral, N, P-range
 680 ± 100
D-range
 650 ± 100

Engine Control/Fuel System
...

Special service tools
Special Service Tools Tool (Number and Name) Illustration Application Fuel Pressure Gauge (09353-24100) Measuring the fuel line pressure Fuel Pressure Gauge Adapter (09353-38000) Connection between the ...

See also:

Larger children
Children who are too large for child restraint systems should always occupy the rear seat and use the available lap/shoulder belts. The lap portion should be fastened snug on the hips and as low as possible. ...

Specifications
Tightening Torques Item N.m kgf.m lb-ft Passenger Air Bag 7.8 - 11.8 0.8 - 1.2 5.8 - 8.7 Curtain airbag (CAB) bolt 7.8 - 11.8 0.8 - 1.2 5.8 - 8.7 Curtain airbag (CAB) nut 3.9 - 5.9 0.4 - 0.6 2.9 - 4.3 ...

Blower
Blower Unit. Components and components location Components Location 1. Blower unit assembly Components 1. Blower unit assembly 2. Inlet case [LH] 3. Inlet seal 4. Inlet case [RH] 5. Intake actuator 6. ...