Hyundai Santa Fe (DM): Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Santa Fe (DM): Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications

Hyundai Santa Fe DM 2013-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications

Specifications

Direct control VFS[UD/B]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
 500.14~9.81
(5.1~0.1,72.54~1.42)
Current value(mA)
50~850
Internal resistance(Ω)
5.1


Underdrive Brake Control Solenoid Valve(UD/B_VFS). Description and Operation
Description Underdrive brake control solenoid valve(UD/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the underdrive brake. ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS). Schematic Diagrams
Circuit Diagram ...

See also:

Front Stabilizer Bar. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

Jump starting procedure
✽ NOTICE If the battery is discharged, the engine can be started using a battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles. To prevent personal ...

Heated Description and Operation
Description Heated pads to grip the steering grip makes the fever. 1. Heated control unit 2. Heated pad Specifications Item Specification Voltage 13.5 V Heated pad resistance 1.4 ~ 1.8 Ω  В± ...