Hyundai Santa Fe (TM): Auto Head Lamp Leveling Device
Components and components location
| Component Location |
| 1. Head lamp
leveling actuator |
Head Lamp Leveling Switch. Schematic diagrams
| Circuit diagram |
Head Lamp Leveling Switch. Repair procedures
| Inspection |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
|
| 3. |
Loosen the mounting screw, remove the crash pad garnish [LH] (A).
|
| 4. |
Press the lock pin, separate the connector (A).
|
| 5. |
Remove the rheostat switch (A) after loosening mounting screws.
|
| Installation |
| 1. |
Install the rheostat switch.
|
| 2. |
Install the crash pad garnish [LH]
|
| 3. |
Install the crash pad lower panel.
|
| 4. |
Connect the negative (-) battery terminal.
|
Auto Lighting Control System
Description and operation Description It's a system that uses illumination sensor to automatically turn ON the tail lamp and head lamp based on the change in surrounding environment's illumination ...
Head Up Display System
Description and operation Description 1. System operation HUD system displays various information on the windshield glass which minimizes the driver’s eye movement to enhance safety and convenience. ...
See also:
Ignition switch
WARNING To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: NEVER allow children or any person who is unfamiliar with the vehicle to touch the ignition switch or related parts. ...
Front End Module
Front Bumper Beam Assembly. Components and components location Components Location 1. Front bumper beam assembly Front Bumper Beam Assembly. Repair procedures Replacement • Put on gloves ...
Troubleshooting
Failure Diagnosis 1. In principle, ESC and TCS controls are prohibited in case of ABS failure. 2. When ESC or TCS fails, only the failed system control is prohibited. 3. However, when the solenoid valve ...
