Hyundai Santa Fe (TM): Cowl Top Cover - Body (Interior and Exterior)Hyundai Santa Fe (TM): Cowl Top Cover

Components and components location

Component Location

1. Cowl Top Cover

Repair procedures

Replacement
1.
Remove the cap and the nuts, and then remove the wiper arm (A).
Tightening torque :
22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)

2.
Disconnect the washer nozzle (A).
3.
Detach the clips, then remove the cowl top cover (B).
4.
To install, reverse removal procedure.
  
•
Replace any damaged clips (or pin-type retainers).
Mirror
Outside Rear View Mirror. Components and components location Component Location 1. Outside Rear View Mirror Outside Rear View Mirror. Repair procedures Replacement    • Put on gloves to prevent ...

Floor Console
Components and components location Components 1. Floor console side cover 2. Floor console upper cover 3. Console armrest lock assembly 4. Storage box mat 5. Front floor console assembly 6. Rear console ...

See also:

Forward and rearward
To move the seat forward or rearward: 1. Pull the seat slide adjustment lever up and hold it. 2. Slide the seat to the position you desire. 3. Release the lever and make sure the seat is locked in place. ...

Knock Sensor (KS). Description and Operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When ...

Automatic Transaxle. Repair procedures
Removal 1. Remove the engine cover. 2. Remove the air cleaner assembly and air duct. 3. Remove the battery and battery tray. 4. Disconnect the inhibitor switch connect (A) and solenoid valve connector ...