Hyundai Santa Fe (TM): Floor Carpet
Repair procedures
Replacement |
|
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
3. |
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
|
4. |
Remove the cowl side trim.
(Refer to Interior Trim - "Cowl Side Trim")
|
5. |
Remove the center pillar lower trim.
(Refer to Interior Trim - "Center Pillar Trim")
|
6. |
Remove the accelerator pedal module.
(Refer to Fuel system-"accelerator pedal")
|
7. |
Remove the front floor carpet assembly (A) , and rear floor carpet assembly
(B).
|
8. |
To install, reverse removal procedure.
|
Quarter Fixed Glass
Components and components location Components 1. Quarter Fixed Glass Repair procedures Replacement [Removal] • Put on gloves to prevent hand injuries. • Use seat covers to ...Front End Module
Front Bumper Beam Assembly. Components and components location Components Location 1. Front bumper beam assembly Front Bumper Beam Assembly. Repair procedures Replacement • Put on gloves ...See also:
To defrost outside windshield
1. Set the temperature to the extreme hot (HI) position. 2. Set the fan speed to the highest (extreme right) position. 3. Press the defrost button (). 4. The outside (fresh) air position will be selected ...
Variable Intake Solenoid (VIS) Valve. Schematic Diagrams
Circuit Diagram ...
Components and Components
Location
Components Connector Pin Information No. Connector A Connector B Connector C Connector D 1 IGN1 Head lamp low switch Wiper low relay Room lamp 2 ACC Auto light switch Burglar alarm relay Cornering lamp ...