Hyundai Santa Fe (TM): Horn
Components and components location
| Component Location |
| 1. Horn switch 2. Horn relay (Engine room compartment) 3. Horn (Low pitch) |
4. Horn (High
pitch) 5. Clock spring |
Repair procedures
| Removal |
| 1. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover"
|
| 2. |
Remove the bolts and disconnect the horn connectors (C), then remove
the high pitch horn (B) and low pitch horn (A).
|
| Installation |
| 1. |
Install the horns after connecting the horn connectors.
|
| 2. |
Install the front bumper cover.
|
| Inspection |
Test the horn by connecting battery voltage to the 1 terminal and ground the
2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace it.
Horn Relay Inspection
| 1. |
Remove the horn relay (A) from the engine room relay box.
|
| 2. |
There should be continuity between the No.30 and No.87 terminals when
power and ground are connected to the No.85 and No.86 terminals.
|
| 3. |
There should be no continuity between the No.30 and No.87 terminals
when power is disconnected.
|
Multifunction Switch
Components and components location Component 1. Steering column 2. Multifunction switch 3. Screw 4. Clock spring Specifications Specifications Items Specifications Rated voltage DC 12V Operating temperature ...
AVN System
Description and operation Description AVN system The AVN system has improved information search and easiness of manipulation for the driver by simplifying the system operation experience and unifying the ...
See also:
Delivery Pipe. Repair procedures
Removal In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair ...
Headrest
The driver's and front passenger's seats are equipped with a headrest for the occupant's safety and comfort. The headrest not only provides comfort for the driver and front passenger, but ...
Hood Latch Release Handle. Components and Components Location
Component Location 1. Hood latch release handle ...
