Hyundai Santa Fe (TM): User settings mode - LCD DisplayHyundai Santa Fe (TM): User settings mode

In this mode, you can change the settings of the instrument cluster, doors, lamps, etc.

1. Driver Assistance
2. Head-Up Display
3. Cluster
4. Lights
5. Door
6. Convenience
7. Units

The information provided may differ depending on which functions are applicable to your vehicle.

Shift to P to edit settings

This warning message illuminates if you try to select an item from the User Settings mode while driving.

  • Automatic transmission / Dual clutch transmission.

For your safety, change the User Settings after parking the vehicle, applying the parking brake and selecting the shift button to P(Park).

Quick guide (Help)

This mode provides quick guides for the systems in the User Settings mode.

Select an item, press and hold the OK button.

For more details about each system, refer to this Owner’s Manual.

Information

When the infotainment system is applied, only the User’s Setting mode on the infotainment system is supported but the User’s Setting mode on the instrument cluster is not supported.

1. Driver Assistance

2. Head-Up Display

3. Cluster

4. Lights

5. Door

6. Convenience

7. Units

View modes
The information provided may differ depending on which functions are applicable to your vehicle. Trip computer mode. Turn By Turn (TBT) mode Trip computer mode The trip computer mode displays information ...

Trip computer (Type A)
The trip computer is a microcomputercontrolled driver information system that displays information related to driving. Information Some driving information stored in the trip computer (for example Average ...

See also:

Water Temperature Control Assembly. Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Loosen the drain plug and drain the engine coolant. 3. Remove the radiator upper hose and lower hose. 4. Disconnect the connectors and then remove ...

Tail Gate Trim. Repair procedures
Replacement [Tail gate trim] • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent ...

Removal and installation
To remove the headrest : 1. Raise it as far as it can go then press the release button (1) while pulling the headrest up (2). To reinstall the headrest : 1. Put the headrest poles (3) into the holes while ...